HOW TO REMOVE 502 SUPER GLUE?
Adhesive 502 is an industrial synthetic glue composed primarily of cyanoacrylate, a liquid form of ankylcyanoacrylate, which, once dried, solidifies into a stable polymer under the principle of anionic polymerization. Acacia 502 on the market in Vietnam actually contains a mixture of two types of monomers, methyl-2-cyanoacrylate and ethyl-2-cyanoacrylate, which are easily polymerized by air vapor. Store in sealed containers or in silica gel. Adhesive 502 is highly effective when applied on wood, plastic, cloth, iron or diamond surfaces, precious stones, etc. It is not only durable, fast, pretty high. However, if during use, the user is not careful to stick to the area of the skin such as hands, eyes or cloth, floor, glass, car ... the bleach also encountered many difficulties.
In case of adhesion of 502 to the skin of the hands, the eye is quickly brought to the nearest hospital for the doctor to remove the glue, avoid corneal burns and the consequences later. If the 502 glue on the floor, glass, car paint ... if not clever in the processing easy to peel, scratch or fade surface surface. In this case, use acetone to bleach.
Acetone in nail polish remover also has an effective effect on skin stains, but will cause dry hands after bleaching. Use a cotton ball with a little acetone, squeeze dry and then gently wipe the adhesive, then rinse with warm water. Do not use a knife to shave, peel immediately ... can cause skin peeling and bleeding.
Or use a high temperature hair dryer. Under the heat of the dryer, both the adhesive 502 and the adhesive will dilate with heat. In order to increase the efficiency of the heat, you should use a cloth to cover the air inlet, located at the bottom of the dryer. Wait until the patch glazes out most, use a clean cloth.
In case of adhesion of 502 to the skin of the hands, the eye is quickly brought to the nearest hospital for the doctor to remove the glue, avoid corneal burns and the consequences later. If the 502 glue on the floor, glass, car paint ... if not clever in the processing easy to peel, scratch or fade surface surface. In this case, use acetone to bleach.
Acetone in nail polish remover also has an effective effect on skin stains, but will cause dry hands after bleaching. Use a cotton ball with a little acetone, squeeze dry and then gently wipe the adhesive, then rinse with warm water. Do not use a knife to shave, peel immediately ... can cause skin peeling and bleeding.
Or use a high temperature hair dryer. Under the heat of the dryer, both the adhesive 502 and the adhesive will dilate with heat. In order to increase the efficiency of the heat, you should use a cloth to cover the air inlet, located at the bottom of the dryer. Wait until the patch glazes out most, use a clean cloth.
Others
Cách phân biệt keo 502 con Ó thật
Cách phân biệt keo 502 con Ó thật
ABRASIVE IN AUTOMOTIVE INDUSTRY
These are all specialized products for automotive industry in Vietnam. There are many different grades of P60 to P2500 on the market and different shapes, sizes, features, or water resistance.
HISTORY OF 502 SUPER GLUE
A few hundred million years ago, the ancient Greeks invented glue used on materials such as wood, clay, copper ... together. The miracle mix is made from egg white, blood, bones, milk, cheese, vegetables and whole grains.