PRODUCT DESCRIPTION
INSTALLATION
hol, xylene, or methyl ethyle ketone (MEK). Do not use soap, detergent or water. Wipe the surface
dry. Sealant will not properly adhere to a wet substrate.
substrates, use of a primer (TOSPRIME C,D or E) is suggested. Allow primer to dry thoroughly be
fore proceeding
Tool imme diately, within 5 minutes of application, with a spatula to spread the sealant against the
back-up material and joint surfaces. Remove masking tape immediately after tooling. Sealant will
begin to skin on the exposed surface in about 10 minutes and cure will progress inward
HANDLING AND SAFETY
Available in 4 colors
White(W) Clear(C) Black(B) Light Gray (G2)
- SEAL IT RIGHT-168 is a one-component silicone sealant which cures to a high
- modulus silicone rubber on exposure to atmospheric moisture at room temperature. This product is a ketoxime cure sealant which does not emit the odors associated with
- acetoxy cure sealants, and is virtually non-corrosive to metal. In addition to its
- exceptional high and low temperature resistance, water resistance, and outstanding weatherability, SEAL IT RIGHT-168 sealant also offers excellent adhesion to glass,
- metal concrete and numerous construction materials
- Single component, ready-to-use sealant
- Room temerature cure
- Neutral cure (ketoxime cure)
- Easy gunnability over a wide temperature range
- Good maintenance of exibility
- Excellent adhesion to many materials
- Sealant for glass-to-glass and glass-to-metal sashing
- Sealant for pre-fabricated housing, freight containers, cold storage rooms interior sealing in building and housing
| Property | Value |
| Consistency ( Độ sệt ) | Paste ( Hỗn hợp nhão ) |
| Specific Gravity ( Trọng lượng riêng, g/cm3 ) (230C ) | 1.03 |
| Extrudability ( Khả năng đùn ép ) Sec | 3 |
| Tack-Free Time ( Thời gian khô bề mặt ) (230C)min | 15 |
| Slump ( Độ co ngót ) mm | <1 |
| Hardness ( Độ cứng ) | 25 |
| Tensile strength ( Độ bền kéo ) MPa | 1.2 |
| Elongation ( Khả năng giãn dài ) % | 300 |
| Adhesion area ( Khả năng bám dính ) | Tuyệt vời |
| UV resistance ( Khả năng chống tia cực tím UV ) | Tuyệt vời |
INSTALLATION
- Surface Preparation
hol, xylene, or methyl ethyle ketone (MEK). Do not use soap, detergent or water. Wipe the surface
dry. Sealant will not properly adhere to a wet substrate.
- Masking
- Primers
substrates, use of a primer (TOSPRIME C,D or E) is suggested. Allow primer to dry thoroughly be
fore proceeding
- APPLYING AND TOOLING SEALANT
Tool imme diately, within 5 minutes of application, with a spatula to spread the sealant against the
back-up material and joint surfaces. Remove masking tape immediately after tooling. Sealant will
begin to skin on the exposed surface in about 10 minutes and cure will progress inward
HANDLING AND SAFETY
- Wear eye protection when handling uncured sealant as it can irritate eyes. In case of eye contact,
- immediately flush eyes well with water and contact a physician
- This product releases acetoxy vapors as a by-product of cure. Adequate ventilation must be maintained in the work place at all times
- Extended contact with the skin may cause irritation and should be avoided
- Not for food contact use
- Store in a cool, dry, dark place
- Keep out of reach of children
- 300 gram e cartridge available in carton box of 24 pieces
Available in 4 colors
White(W) Clear(C) Black(B) Light Gray (G2)
